Disperse Yellow 3 Relative Name is Acetamine Yellow CG;C.I. Solvent Yellow 92;C.I. Solvent Yellow 99;Calcosyn Yellow GC;Celliton Discharge Yellow GL;Celliton Fast Yellow G;Celliton Fast YellowGA-CF;Celliton Yellow G;Celutate Yellow GH;Cibacet Yellow 2GC;CibacetYellow 2GC150;Cibacet Yellow GBA;Cibacete Yellow GBA;Tulasteron Fast Yellow 2G-B;Vonteryl Yellow G;Waxoline Yellow RP-FW;Yellow Reliton G;Yellow Z.
Test Method | Rating | Remarks |
Wash Fastness (ISO 105-C06) | 4-5 | 60°C, staining: cotton 4-5, polyester 5 |
Perspiration (ISO 105-E04) | 4-5/4-5 | Acid & alkaline, excellent resistance |
Rubbing Fastness (ISO 105-X12) | ||
• Dry | 5 | Excellent dry rubbing |
• Wet | 4-5 | Very good wet rubbing |
Light Fastness (ISO 105-B02) | 6-7 | Xenon arc, 80 hours (high durability) |
Sublimation Fastness (ISO 105-X11) | 4-5 | 180°C/30s, minimal staining |
Dry Heat Fixation (ISO 105-P01) | 4-5 | 210°C/60s, excellent heat resistance |
Chlorinated Water (ISO 105-E03) | 4-5 | 50 ppm available chlorine |
Sea Water (ISO 105-E02) | 5 | Excellent seawater resistance |
Hot Pressing (ISO 105-X11) | 4-5 | 180°C/15s, minimal migration |
Mainly used for Digital Inkjet Ink (for Direct & Transfer Printing) & Thermal Transfer in Textile.
25kg/bag, carton, drum
Parameter | Specification | Test Method / Remarks |
Dye Purity (HPLC) | ≥ 99.2% | Reverse phase HPLC, 254nm & 430nm |
Moisture Content | ≤ 0.5% | Karl Fischer titration |
Ash Content (550°C) | ≤ 0.05% | Gravimetric analysis |
pH Value (1% aqueous dispersion) | 6.8 - 7.5 | Potentiometric, 25°C |
Electrical Conductivity | ≤ 15 μS/cm | 1% in DI water, 25°C |
Particle Size Distribution | Critical for inkjet performance | |
• Dv10 | ≤ 0.08 μm | Laser diffraction (Malvern Mastersizer) |
• Dv50 | ≤ 0.12 μm | ISO 13320:2009 |
• Dv90 | ≤ 0.25 μm | Guaranteed < 0.3 μm |
• Dv99 | ≤ 0.40 μm | 100% < 0.5 μm |
Filterability Ratio | ≥ 99.95% (0.45 μm filter) | Pressure filtration @ 3.5 bar |
Ionic Impurities (ICP-MS) | Ultra-low ionic specification | |
• Sodium (Na⁺) | ≤ 5 ppm | |
• Potassium (K⁺) | ≤ 3 ppm | |
• Calcium (Ca²⁺) | ≤ 1 ppm | |
• Iron (Fe) | ≤ 0.5 ppm | |
• Heavy metals (total) | ≤ 1 ppm | Pb, Cd, Hg, Cr⁶⁺, As |
Dispersant System | Proprietary polymeric blend (non-ionic) | Optimized for piezoelectric printheads |
